The construction phase of the build is pretty much complete. The fiber glassing is completed except for the glassing of the skeg.
In this photograph the decks to the stern and bow buoyancy chambers have been dry fitted along with their watertight hatches - the decks will be glued in permanently after each chamber has been painted with two pot 'Everdure' timber sealer.
After the decks are glued in place the outside and inside of the hull will be sanded and sealed with three coats of 'Everdure' followed by three coats of two pot 'Duropox' paint. Then after fastening the hatches in place and installing the rowlock fittings, we are all ready to go rowing.

6 comments:
Good job.. be nice to see how she rows...
Yes, I'm looking forward to how the dory performs and to coming to grips with the subtle and nuanced art of rowing.
Rowing I'm OK with, it's the going backwards bit I struggle with.. 😁
Yes, and that's something that I don't exactly struggle with but understand quite well. My main worry is running into something. Some rowers set up a rear vision mirror on one of the gunwales that they glance at from time to time which is something that I will do. I will also try out a small mirror that cyclists use which they clip on to their riding helmet. As I will be using the dory for exercise there are plenty of areas on our local harbour where you can plan a pretty reasonable row without running into something. Facing with my back to the journey while keeping a watchful eye out is something I guess I will have to get used to.
Dry fitting the decks over the buoyancy chambers with watertight hatches is a smart touch for a light dory. Sealing the inside of each chamber before the decks go on will pay off for years. Not long now until she is out rowing.
Thanks for your comment Matt. Yes sealing plywood, especially in closed in, less ventilated areas is a must and certainly extends the life of the plywood. The big enemy of wood in general and plywood in particular is continual saturation and dampness from fresh water.
Post a Comment